The latest developments in engineering, as part of Progressive Engineer, the online magazine and information source with a sustainability slant.
Friday, September 28, 2018
Searching for new bridge forms that can span further
Newly identified bridge forms could enable significantly longer bridge spans to be achieved in the future, potentially making a crossing over the Strait of Gibraltar, from the Iberian Peninsula to Morocco, feasible. The new bridge forms – identified by a team of researchers from the University of Sheffield and Brunel University London, working with long-span bridge expert Ian Firth of engineering consultants COWI – use a new mathematical modeling technique to identify optimal forms for very long-span bridges. The research was published recently in the Proceedings of the Royal Society.
A bridge’s span is the distance of suspended roadway between towers, with the current world record standing at just under 2km. The most popular form for long spans is the suspension bridge form, as used for the Humber Bridge, though the cable-stayed bridge form, where cables directly connect the tower to the roadway – such as used in the recently constructed Queensferry Crossing in Scotland – is becoming increasingly popular.
As bridge spans become longer, a rapidly growing proportion of the structure is needed just to carry the bridge’s own weight, rather than the traffic crossing it. This can create a vicious cycle: a relatively small increase in span requires significantly more material, leading to a heavier structure that requires yet more material to support it. This also sets a limit on how long a bridge span can be; beyond this limit a bridge simply cannot carry its own weight.
One option is to use stronger, lighter materials. However, steel remains the preferred choice because it is tough, readily available, and relatively cheap. So the only other way to increase span is change the bridge’s design.
Professor Matthew Gilbert from the University of Sheffield, who led the research, says, “The suspension bridge has been around for hundreds of years and while we’ve been able to build longer spans through incremental improvements, we’ve never stopped to lsee if it’s actually the best form to use. Our research has shown that more structurally efficient forms do exist, which might open the door to significantly longer bridge spans in the future.”
The technique devised by the team draws on theory developed by Professor Gilbert’s namesake, Davies Gilbert, who in the early 19th Century used mathematical theory to persuade Thomas Telford that the suspension cables in his original design for the Menai Strait bridge in North Wales followed too shallow a curve. He also proposed a "catenary of equal stress" showing the optimal shape of a cable accounting for the presence of gravity loads.
By incorporating this early 19th century theory into a modern mathematical optimization model, the team has identified bridge concepts that require the minimum possible volume of material, potentially making significantly longer spans feasible. The mathematically optimal designs contain regions which resemble a bicycle wheel, with multiple "spokes" in place of a single tower. But these would be very difficult to build in practice at large scale. The team therefore replaced these with split towers consisting of just two or three "spokes" as a compromise that retains most of the benefit of the optimal designs,while being a little easier to construct.
For a 5km span, which is likely to be required to build the 14km Strait of Gibraltar crossing, a traditional suspension bridge design would require far more material, making it at least 73 percent heavier than the optimal design. In contrast, the proposed two- and three-spoke designs would be just 12 and 6 percent heavier, making them potentially much more economical to build.
The new bridge forms require less material principally because the forces from the deck are transmitted more efficiently through the bridge superstructure to the foundations. This is achieved by keeping the load paths short and avoiding sharp corners between tensile and compressive elements.
The team emphasises that their research is just the first step and that the ideas cannot be developed immediately for construction of a mega-span bridge. The current model considers only gravity loads and does not yet consider dynamic forces arising from traffic or wind loading. Further work is also required to address construction and maintenance issues.
Co-author Ian Firth from COWI says, "This is an interesting development in the search for greater material efficiency in the design of super-long span bridges. There is much more work to do, notably in devising effective and economic construction methods, but maybe one day we will see these new forms taking shape across some wide estuary or sea crossing."
The research, funded by the Engineering and Physical Sciences Research Council (EPSRC), was also presented at "Tomorrow’s Megastructures," a symposium organized by the International Association for Bridge and Structural Engineering.
Monday, September 17, 2018
Water and wastewater experts Nogaj and Kabouris join Cardno’s Clearwater office
Cardno has announced that Thomas Nogaj, PhD, PE and John Kabouris, PhD, PE have joined the firm as water and wastewater infrastructure practice group manager and wastewater technology specialist respectively.
Nogaj brings more than 30 years of experience in the civil and environmental engineering fields. He provides consulting and project management on a broad range of water/wastewater treatment and conveyance projects for facilities of all sizes. He holds a PhD in Environmental Engineering from the University of Central Florida and is a licensed Professional Engineer in Florida and Illinois.
Kabouris has more than 30 years of experience in environmental engineering, offering expertise in modeling, plant controls, and optimization of nutrient removal, sidestream and mainstream anammox process development and optimization, and advanced digestion and biogas utilization. He holds a PhD in Civil and Environmental Engineering from the Georgia Institute of Technology and is a licensed Professional Engineer in Florida. He is actively involved at the national level with the Water Environment Federation and is Associate Editor of the environmental journal Water Environment Research.
“Thomas and John have provided their wealth of expertise and research to numerous water and sewer departments in the United States and abroad, and that knowledge has resulted in significant financial savings and more effective systems for clients,” says Doug Stoker, Cardno Southeast Business Unit manager. “We are excited to have them on our team.”
Headquartered in Australia, Cardno is an international professional infrastructure and environmental services company with specialist expertise in the development and improvement of physical and social infrastructure for communities around the world. Cardno’s team includes professionals who plan, design, manage and deliver sustainable projects and community programs. For more information, visit www.cardno.com.
Nogaj brings more than 30 years of experience in the civil and environmental engineering fields. He provides consulting and project management on a broad range of water/wastewater treatment and conveyance projects for facilities of all sizes. He holds a PhD in Environmental Engineering from the University of Central Florida and is a licensed Professional Engineer in Florida and Illinois.
Kabouris has more than 30 years of experience in environmental engineering, offering expertise in modeling, plant controls, and optimization of nutrient removal, sidestream and mainstream anammox process development and optimization, and advanced digestion and biogas utilization. He holds a PhD in Civil and Environmental Engineering from the Georgia Institute of Technology and is a licensed Professional Engineer in Florida. He is actively involved at the national level with the Water Environment Federation and is Associate Editor of the environmental journal Water Environment Research.
“Thomas and John have provided their wealth of expertise and research to numerous water and sewer departments in the United States and abroad, and that knowledge has resulted in significant financial savings and more effective systems for clients,” says Doug Stoker, Cardno Southeast Business Unit manager. “We are excited to have them on our team.”
Headquartered in Australia, Cardno is an international professional infrastructure and environmental services company with specialist expertise in the development and improvement of physical and social infrastructure for communities around the world. Cardno’s team includes professionals who plan, design, manage and deliver sustainable projects and community programs. For more information, visit www.cardno.com.
Saturday, September 8, 2018
StormwateRx introduces Purus Nitrate for stormwater treatment
StormwateRx, a stormwater treatment and filtration company based in Portland, Oregon, has announced the development and release of a new product in its line of Purus advanced polishers, Purus Nitrate targets soluble nitrate in industrial stormwater runoff. This system is ideal for industries where nitrogen compounds or petroleum products are used or where organic materials are processed, including fabricated metal products, food processing, and chemical manufacturing.
Purus Nitrate is normally installed and flow-matched in a "treatment train" configuration with StormwateRx's Aquip stormwater filtration technology, an upstream pre-filtration system. The typical removal efficiency of this technology falls in the range of 80 to 90 percent, usually to below the required numeric action levels (NALs) or benchmarks.
Purus Nitrate has a dissolved nitrate capacity exceeding 40 pounds (as nitrogen) for a typical 100 to 300 gallon-per-minute treatment flow rate. Slipstream treatment configurations are available to extend run-time when less nitrate needs to be removed from the stormwater.
StormwateRx designs, manufactures, installs, and maintains stormwater treatment systems for industrial customers throughout North America. For more information, visit https://stormwaterx.com.
Note: Progressive Engineer ran a company profile on StormwateRx in 2010. See it at http://www.progressiveengineer.com/company_profiles/stormWateRx.htm.
Saturday, September 1, 2018
Nancy Lyon-Stadler to lead WSP Cleveland office
Nancy Lyon-Stadler has been appointed
by WSP USA, an engineering and
professional services consultancy, to lead its Cleveland, Ohio office. In her
new position, Lyon-Stadler will be responsible for office management and
expansion, product delivery, client engagement, and new business development.
Since Lyon-Stadler
joined WSP as a senior principal engineer in 2015, she has been part of several
transformational projects in northeast Ohio, including traffic-related aspects
of the reconstruction of the George
V. Voinovich Bridge, which opened in September 2016 and greatly improved
traffic in downtown Cleveland. She
also conducted traffic analysis and developed congestion mitigation strategies
for the 2016 Republican National Convention in Cleveland, supporting the event
organizers, the U.S. Secret Service, and the Cleveland Police. “Nancy
has led multiple projects to improve livability in northeast Ohio communities
through the integration of bicycle and pedestrian facilities and transit
enhancements within the transportation network, including developing the design
concept and implementation plan for Cleveland’s innovative Midway Cycle Track
Plan,” says Jerry Jannetti, senior vice president and northeast regional
manager at WSP.
Lyon-Stadler
has over 30 years of engineering experience in the private and public sector
with expertise in planning, design, and construction. She has been employed as a
consulting engineer for more than 20 years and prior to that, she served as a
civil engineering officer in the U.S. Air Force.
Lyon-Stadler
has a B.S. in civil engineering from Virginia Polytechnic Institute and State University and an
M.S. in civil engineering from The Ohio State University. She is a registered
professional engineer in Colorado, North Carolina, Ohio and South Carolina, as
well as a licensed professional traffic operations engineer
WSP USA, formerly WSP | Parsons Brinckerhoff, is
the U.S. operating company of the engineering and
professional services firms WSP. Dedicated to serving local communities, the firm consists of engineers, planners, technical experts, strategic advisors, and
construction management professionals. WSP USA designs solutions
in the buildings, transportation, energy, water, and environment sectors. With
more than 7,000 people in 100 offices across the United States, they partner with clients to help communities prosper. For more information, visit www.wsp.com.
Saturday, August 25, 2018
New ASTM International standard helps in construction of geosynthetic clay liners
A new ASTM International standard will help those who construct and install geosynthetic clay liners (GCLs), which are used to help with containment for landfills, coal combustion residual storage cells,
mining operations, and remediation and environmental protection projects. The new standard (D8204) focuses on evaluating both best practices as well as possible negative impacts of installing and constructing GCLs. ASTM’s committee on geosynthetics developed the standard.
According to ASTM International member Kent von Maubeuge, the new standard is meant to be used with full-scale GCL installation test pads, not laboratory evaluations. “The practices outlined in the standard provide for project-specific parameters and thus can provide real project insight into how GCL materials should be installed on a specific site to achieve optimal engineered barrier performance,” says von Maubeuge, director, corporate identity and corporate communication and senior product manager, NAUE GmbH & Co. KG.
According to von Maubeuge, who chairs the GCL subcommittee, insights from using the new standard will help design engineers, facility and project owners, specification writers, certified quality auditors, and geosynthetic installers. Also, manufacturers will benefit from the variations in data from different test pads, which may support the development of future GCL products.
To purchase standards, contact ASTM International customer relations at 877-909-ASTM or sales@astm.org.
mining operations, and remediation and environmental protection projects. The new standard (D8204) focuses on evaluating both best practices as well as possible negative impacts of installing and constructing GCLs. ASTM’s committee on geosynthetics developed the standard.
According to ASTM International member Kent von Maubeuge, the new standard is meant to be used with full-scale GCL installation test pads, not laboratory evaluations. “The practices outlined in the standard provide for project-specific parameters and thus can provide real project insight into how GCL materials should be installed on a specific site to achieve optimal engineered barrier performance,” says von Maubeuge, director, corporate identity and corporate communication and senior product manager, NAUE GmbH & Co. KG.
According to von Maubeuge, who chairs the GCL subcommittee, insights from using the new standard will help design engineers, facility and project owners, specification writers, certified quality auditors, and geosynthetic installers. Also, manufacturers will benefit from the variations in data from different test pads, which may support the development of future GCL products.
To purchase standards, contact ASTM International customer relations at 877-909-ASTM or sales@astm.org.
Saturday, August 11, 2018
ACAA selects architectural and engineering firms to design new terminal at Pittsburgh International Airport
Following months of research, technical and creative presentations, interviews and evaluations, the Allegheny County Airport Authority recently announced the architectural and engineering firms selected to design a new terminal that will transform Pittsburgh International Airport for a modern travel experience. Gensler, headquartered in San Francisco, CA, and HDR, headquartered in Omaha, NE, have entered into a joint-venture agreement to design and deliver the Terminal Modernization Program.
The joint venture team has formed an association with luis vidal + architects, headquartered in Madrid, Spain, to develop the architectural design vision for the new terminal that consolidates check-in, ticketing, security and baggage operations into one connected facility. HDR will handle engineering implementation of the design.
Airport Authority Board members approved a $15 million contract with the joint venture team for initial design concepts to be drafted over the next few months, as the Authority also works to engage key stakeholders and gather input into final design of the new terminal. The initial design concept is expected to be unveiled early next year.
“We are confident that we have assembled a world-class team with the vision, knowledge and experience necessary to work with all of our partners in building Pittsburgh’s airport – an airport that will transform the travel experience now and into the future and continue advancing our region,” says Allegheny County Airport Authority CEO Christina Cassotis. “Our selection team has carefully researched best airport design and modernization practices and worked to review qualifications of the firms, their proposals and references.”
Eleven firms responded to the initial request for qualifications in January. Of those, four were invited to submit full proposals, make creative and technical presentations and be interviewed by a selection committee. The firms were evaluated on criteria including experience, team composition and responsibilities, design and management approach, quality assurance and cost control, and DBE/local participation.
Gensler, which has offices in 46 cities around the world including in Pennsylvania, designed the 32-story Tower at PNC Plaza in Downtown Pittsburgh, along with Incheon International Airport in Korea. From facilities serving executive or regional aircraft to those at the largest, most prestigious international hubs, Gensler provides experience-focused design. “Gensler is thrilled to be part of this transformational project,” says Ty Osbaugh, Aviation Leader and Principal at Gensler. “At our core, we seek to enhance the passenger experience through design. Meshing our team with the ambition of the ACAA, we look forward to jointly creating a world-class experience for Western Pennsylvania.”
The portfolio of HDR, which has 10,000 employees and more than 200 offices worldwide, including an office on Stanwix Street downtown, includes universities, hospitals, modernization of the Honolulu International Airport, and locally, the Greenfield Bridge replacement project. The firm is also noted for innovations in green building design and sustainability. “HDR is committed to leveraging our technical, multidisciplinary expertise to help create Pittsburgh’s next world class airport,” says Bill Peduzzi, HDR Aviation Director. “As a lifelong resident, I am thrilled to apply what I have learned from a career spent in airport development and hope to inspire the next generation of aviation leaders to continue to innovate and enhance the role great airports can play in a community.”
luis vidal + architects, which has offices across Spain, the UK, Dominican Republic, Chile, and the United States, cites Terminal 2 at Heathrow Airport among its impressive list of projects. In the United States, the practice is currently working at the international airports of Denver, Boston Logan and Dallas Fort Worth. Vidal himself also was a leader of the design team of the Terminal 4 project at Madrid-Barajas Airport in Spain. “The Pittsburgh International Airport project will reflect its community; a design that is bold, unique and competitive and that will provide the first and last impression that people will carry with them of the Pittsburgh region,” Luis Vidal remarks.
The joint venture team has formed an association with luis vidal + architects, headquartered in Madrid, Spain, to develop the architectural design vision for the new terminal that consolidates check-in, ticketing, security and baggage operations into one connected facility. HDR will handle engineering implementation of the design.
Airport Authority Board members approved a $15 million contract with the joint venture team for initial design concepts to be drafted over the next few months, as the Authority also works to engage key stakeholders and gather input into final design of the new terminal. The initial design concept is expected to be unveiled early next year.
“We are confident that we have assembled a world-class team with the vision, knowledge and experience necessary to work with all of our partners in building Pittsburgh’s airport – an airport that will transform the travel experience now and into the future and continue advancing our region,” says Allegheny County Airport Authority CEO Christina Cassotis. “Our selection team has carefully researched best airport design and modernization practices and worked to review qualifications of the firms, their proposals and references.”
Eleven firms responded to the initial request for qualifications in January. Of those, four were invited to submit full proposals, make creative and technical presentations and be interviewed by a selection committee. The firms were evaluated on criteria including experience, team composition and responsibilities, design and management approach, quality assurance and cost control, and DBE/local participation.
Gensler, which has offices in 46 cities around the world including in Pennsylvania, designed the 32-story Tower at PNC Plaza in Downtown Pittsburgh, along with Incheon International Airport in Korea. From facilities serving executive or regional aircraft to those at the largest, most prestigious international hubs, Gensler provides experience-focused design. “Gensler is thrilled to be part of this transformational project,” says Ty Osbaugh, Aviation Leader and Principal at Gensler. “At our core, we seek to enhance the passenger experience through design. Meshing our team with the ambition of the ACAA, we look forward to jointly creating a world-class experience for Western Pennsylvania.”
The portfolio of HDR, which has 10,000 employees and more than 200 offices worldwide, including an office on Stanwix Street downtown, includes universities, hospitals, modernization of the Honolulu International Airport, and locally, the Greenfield Bridge replacement project. The firm is also noted for innovations in green building design and sustainability. “HDR is committed to leveraging our technical, multidisciplinary expertise to help create Pittsburgh’s next world class airport,” says Bill Peduzzi, HDR Aviation Director. “As a lifelong resident, I am thrilled to apply what I have learned from a career spent in airport development and hope to inspire the next generation of aviation leaders to continue to innovate and enhance the role great airports can play in a community.”
luis vidal + architects, which has offices across Spain, the UK, Dominican Republic, Chile, and the United States, cites Terminal 2 at Heathrow Airport among its impressive list of projects. In the United States, the practice is currently working at the international airports of Denver, Boston Logan and Dallas Fort Worth. Vidal himself also was a leader of the design team of the Terminal 4 project at Madrid-Barajas Airport in Spain. “The Pittsburgh International Airport project will reflect its community; a design that is bold, unique and competitive and that will provide the first and last impression that people will carry with them of the Pittsburgh region,” Luis Vidal remarks.
Sunday, August 5, 2018
Uplift Data Partners integrates with PlanGrid to give builders immediate access to drone imagery
Uplift Data Partners, the data capture pilot platform for enterprise businesses, recently announced it has integrated with PlanGrid, which specializes in construction productivity software. Uplift's 2D and 3D aerial drone imagery is now accessible directly into PlanGrid, giving construction teams a real-time view of job sites and improving their ability to detect costly errors and reduce rework.
Previously, Uplift's drone-captured images were housed within its portal and PlanGrid users had to log in to both platforms to access these images. Now, project team members in the field, trailer, and office can easily access drone imagery directly from PlanGrid, improving team communications, reducing change orders, and providing real-time updates to current project status.
Since 2015, Uplift Data Partners has delivered aerial insights for the AEC industry. Uplift's solution combines an extensive network of skilled and highly trained pilots, broad knowledge of FAA airspace rules, and a proactive approach to compliance and regulatory guidelines. Using Uplift's drone service, builders can accurately survey a project and detect mistakes by overlaying site designs and line work onto the drone imagery.
"The integration of drone imagery into PlanGrid is a huge accomplishment for us," says Suzanne El-Moursi, president of Uplift Data Partners. "Uplift Data Partners provides drone service for the AEC industry. We are passionate about enabling the free flow of drone data to further augment and support other data sources, increasing the value of the overall insight to the end user, in this case, the project engineer."
"Our goal at PlanGrid is to increase productivity through innovative and impactful technology," says James Cook, head of strategic alliances and partnerships at PlanGrid. "Drone technology provides immeasurable insights into the progress and accuracy of a construction site, and Uplift Data Partners has established itself as a cutting-edge platform with its expertise of compliance and airspace regulations. The integration of Uplift's drone imagery into PlanGrid will give our customers a real-time view of jobsites and further improve their productivity."
The integration of two companies will benefit enterprise customers who use both PlanGrid and Uplift, as seen recently with Clayco, a full-service real estate, architecture, engineering, design-build and construction firm. For the past three years, Clayco has used Uplift Data Partners as their drone provider, leveraging the company's drone expertise across their portfolio of projects. Now, Clayco will migrate all their projects onto PlanGrid's platform, using both companies' capabilities and taking advantage of a seamless experience.
Uplift Data Partners was founded in 2015 in Chicago. Its network covers the United States, and its network-wide night waiver allows for completing night missions. For more information, visit www.plangrid.com and www.upliftdatapartners.com.
Previously, Uplift's drone-captured images were housed within its portal and PlanGrid users had to log in to both platforms to access these images. Now, project team members in the field, trailer, and office can easily access drone imagery directly from PlanGrid, improving team communications, reducing change orders, and providing real-time updates to current project status.
Since 2015, Uplift Data Partners has delivered aerial insights for the AEC industry. Uplift's solution combines an extensive network of skilled and highly trained pilots, broad knowledge of FAA airspace rules, and a proactive approach to compliance and regulatory guidelines. Using Uplift's drone service, builders can accurately survey a project and detect mistakes by overlaying site designs and line work onto the drone imagery.
"The integration of drone imagery into PlanGrid is a huge accomplishment for us," says Suzanne El-Moursi, president of Uplift Data Partners. "Uplift Data Partners provides drone service for the AEC industry. We are passionate about enabling the free flow of drone data to further augment and support other data sources, increasing the value of the overall insight to the end user, in this case, the project engineer."
"Our goal at PlanGrid is to increase productivity through innovative and impactful technology," says James Cook, head of strategic alliances and partnerships at PlanGrid. "Drone technology provides immeasurable insights into the progress and accuracy of a construction site, and Uplift Data Partners has established itself as a cutting-edge platform with its expertise of compliance and airspace regulations. The integration of Uplift's drone imagery into PlanGrid will give our customers a real-time view of jobsites and further improve their productivity."
The integration of two companies will benefit enterprise customers who use both PlanGrid and Uplift, as seen recently with Clayco, a full-service real estate, architecture, engineering, design-build and construction firm. For the past three years, Clayco has used Uplift Data Partners as their drone provider, leveraging the company's drone expertise across their portfolio of projects. Now, Clayco will migrate all their projects onto PlanGrid's platform, using both companies' capabilities and taking advantage of a seamless experience.
Uplift Data Partners was founded in 2015 in Chicago. Its network covers the United States, and its network-wide night waiver allows for completing night missions. For more information, visit www.plangrid.com and www.upliftdatapartners.com.
Subscribe to:
Posts (Atom)




